• Over 1,000,000 Customers and 150,000 Products
  • Officially Registered Mail-Order Retailer
  • Professional‑Grade Gear Developed for Emergency Services
  • Same-Day Shipping in Most Cases
Go to homepage

  • 4,9

€0.00

Filter products

37 Item found

Produktanzeige:
Flasche, Lotion
Saw chain adhesive oil UWS
For motorized chain saws of all manufacturers.

€11.42

In Stock

In Stock

Flasche, Lotion, Kosmetik, Parfüm
Drilling/cutting oil 50ml HANSELINE
HANSELINE drilling oil / cutting oil - High-alloy, chlorine-free EP cutting oil - For general machining operations as well as for punching, drawing and deep drawing of steels, medium to high skills, and non-ferrous metals - Polar active ingredients, which give the oil high wettability and good adhesion to the metal surfaces - Prevents selected, chemically reacting EP additives a welding and tearing loose again roughness peaks between the workpiece and tool cutting edge.

Content: 0.5 liter (€71.54 / 1 liter)

€35.77

In Stock

In Stock

Flasche
Chain special oil 100ml bottle E-COLL
EU chain special oil E-COLL - Dissolves dirt and old lubricating films - Protects chains from corrosion and increases the service life - Good creep - Water repellent - Temperature resistance: -40 °C to +80 °C

€41.48

In Stock

In Stock

Erste Hilfe
Cutting oil DVGW 5L E-COLL
EU cutting oil E-COLL - DVGW tested - Consists of special polyglycols and special additives to improve the cutting quality - The product is water-soluble and can therefore also be easily washed off with water - Used wherever threads are cut for installation purposes on drinking water pipes and other water consumption - For pipelines made of steel and stainless steel - DVGW tested and registered under no. DW-0201BL20270 - To obtain an optimum cutting quality, the product is to be used undiluted - For better identification, the product is colored red.

Content: 20 liter (€9.93 / 1 liter)

€198.59

In Stock

In Stock

Flasche
Compressed air oil 125ml E-COLL
EU Special Compressed Air Oil E-COLL - Synthetic hammer drill oil - Highly effective special compressed air oil for compressed air tools of all systems - Especially suitable for compressed air impact tools with sound insulation jacket - Binding of condensation water - Excellent corrosion protection - Wear protection and pressure absorption capacity -. Adhesion and aging resistance - Easy delivery and spraying - Economical consumption - No binding of deposits due to cleaning effect - Full impact power - Anti-icing for cylinder locks - Application by means of upstream oiler according to operating instructions or directly into the air hose - Anti-icing up to -50 °C.

Content: 2.5 liter (€40.31 / 1 liter)

€100.77

In Stock

In Stock

Kanne
Hydraulic oil HLP32 10 liters
opta hydraulic oil HLP - HLP hydraulic oils according to DIN 51524-2 - Based on highly ageing-resistant special raffinates - For highly stressed hydraulic systems at high thermal loads - Excellent corrosion protection and wear-reducing effect on pumps and hydraulic motors.

Content: 10 liter (€12.59 / 1 liter)

€125.94

Delivery time on request

Delivery time on request

Kann, Spraydose, Zinn
12x E-COLL Universal Schneidöl 500 ml Spritzflache
EU Universal-Schneidöl E-COLL - Für alle normalen Einsatzgebiete - Frei von gefährlichen Inhaltsstoffen - Sorgt für optimale Kühlung - Zum Bohren, Nibbeln, Fräsen, Sägen, Drehen usw. - Hervorragende Kühleigenschaft - Verlängerung der Werkzeugstandzeit - Beste Schmierleistung - Hohe Oberflächengüte - Vermindert Kraftaufwand - Hohe Dauerbelastung und größere Schnittgeschwindigkeit - Temperaturbeständigkeit bis +180 °C - Chlorfrei - Silikonfrei - Nicht mit Wasser mischbar Technische DatenInhalt: 500 ml Gebinde: Spritzflasche Gewicht: 1.000 g Art.-Nummer: DVE4317784015554 Shop-Nummer: DVE4317784015554 EAN: 4317784015554

Content: 6 liter (€21.19 / 1 liter)

€127.16

Delivery time on request

Delivery time on request

Anti-corrosion oil OHK10 5L E-COLL
Anti-corrosion oil OHK10 5L E-COLL
EU corrosion protection oil OHK10 E-COLL - As temporary corrosion protection for metallic surfaces - For the preservation of small parts, tools and large areas on sheet metal, steel beams, etc.. - Also recommended as additional corrosion protection in cutting oils, non-water-miscible metalworking oils and hydraulic oils - Pre-dissolved in low viscosity hydrocarbons - Can be used directly as a finished product for various corrosion protection tasks - Corrosion protection for ferrous and non-ferrous metals, even with thin film - Can be applied by all relevant spraying methods - However, in many cases simple dipping is the most effective method - Water displacing effect - Good lubricating effect - Protection against hand weld corrosion - Removable with solvents and aqueous cleaners.

Content: 5 liter (€10.60 / 1 liter)

€53.00

In Stock

In Stock

Compressed air oil 1L E-COLL
Compressed air oil 1L E-COLL
EU Special Compressed Air Oil E-COLL - Synthetic hammer drill oil - Highly effective special compressed air oil for compressed air tools of all systems - Especially suitable for compressed air impact tools with sound insulation jacket - Binding of condensation water - Excellent corrosion protection - Wear protection and pressure absorption capacity -. Adhesion and aging resistance - Easy delivery and spraying - Economical consumption - No binding of deposits due to cleaning effect - Full impact power - Anti-icing for cylinder locks - Application by means of upstream oiler according to operating instructions or directly into the air hose - Anti-icing up to -50 °C.

Content: 20 liter (€11.62 / 1 liter)

€232.31

In Stock

In Stock

Cutting oil spray 400 ml Efficient WE
Cutting oil spray 400 ml Efficient WE
Drilling and cutting oil spray - Chlorine and silicone-free - For optimum cooling - Extension of tool life - Best lubrication performance - High continuous load and greater cutting speed possible - Suitable for non-cutting and cutting operations such as pressing, turning, drilling, milling, nibbling and thread cutting.

Content: 4.8 liter (€190.90 / 12 liter)

€76.36

In Stock

In Stock

Universal cutting oil 10L E-COLL
Universal cutting oil 10L E-COLL
EU Universal cutting oil E-COLL - For all normal applications - Free of hazardous ingredients - Provides optimum cooling - For drilling, nibbling, milling, sawing, turning, etc.. - Excellent cooling property - Prolongs tool life - Best lubrication performance - High surface quality - Reduces effort - High continuous load and greater cutting speed - Temperature resistance up to +180 °C - Chlorine-free - Silicone-free - Not miscible with water.

Content: 10 liter (€11.29 / 1 liter)

€112.85

Delivery time on request

Delivery time on request

Flasche, Auto, Transport, Fahrzeug
Teroson VR 400 Can 350ml (fluid)
Housing gasket VR 400 - Teroson VR 400 Fluid - housing and flange gasket - can 350 ml

Content: 4.2 liter (€1,369.66 / 12 liter)

€479.38

In Stock

In Stock

Erste Hilfe
Cutting oil spray DVGW 400ml E-COLL
EU cutting oil E-COLL - DVGW tested - Consists of special polyglycols and special additives to improve the cutting quality - The product is water-soluble and can therefore also be easily washed off with water - Used wherever threads are cut for installation purposes on drinking water pipes and other water consumption - For pipelines made of steel and stainless steel - DVGW tested and registered under no. DW-0201BL20270 - To obtain an optimum cutting quality, the product is to be used undiluted - For better identification, the product is colored red.

Content: 4.8 liter (€24.91 / 1 liter)

€119.57

In Stock

In Stock

Zinn, Kann, Spraydose
12x Teroson VR 730 AE 400 ml FL Weißes Fett
Weißes Fett - Haftfestes weißes Sprühfett - Hervorragende Schmier- und Korrosionsschutzeigenschaften - Für mechanische Antriebe wie Ketten, Zahnräder, Gestänge usw. - Wasserabweisend - Verschleißhemmend Technische DatenInhalt: 400 ml Gewicht: 370 g Art.-Nummer: DVE4002872156614 Shop-Nummer: DVE4002872156614 EAN: 4002872156614

Content: 4.8 liter (€512.18 / 12 liter)

€204.87

In Stock

In Stock

Multipurpose lubricant 5 l canister
Multipurpose lubricant 5 l canister
WD-40® multi-function product - Silicone, resin and PTFE free - Rust remover, lubricant, contact spray, corrosion protection, cleaner - Infiltrates rust layers, loosens stuck mechanics and seized vehicle and machine parts - Removes stubborn dirt, Displaces moisture from electrical contacts and prevents leakage currents - Leaves a thin protective film that prevents the formation of moisture and rust on metal parts Technical characteristics: - Temperature application range: -50 °C to +150 °C 5-l Kaniste Single delivery possible at extra cost.

Content: 20 liter (€69.91 / 4 liter)

€349.56

In Stock

In Stock

Flasche, Shaker
Drilling oil concentrate 5L chlorine-free (F) E-COLL
EU drilling oil concentrate E-COLL - Mineral oil-containing white EP drilling emulsion, chlorine-free, absolutely stable and homogeneous - Insensitive to hardness ranges in the water (lime etc.).) - Largely resistant to microbial infestation - Physiologically harmless when used properly - Emulsifiable for long tool life - Ideal for drilling, turning, milling, sawing and thread cutting - For aluminum, non-ferrous metals and their alloys as well as cast iron and stainless steel - Milling: approx. 9% (1 l concentration in 11 l water) - Sawing, turning, drilling: approx. 10% (1 l concentration in 10 l water) - Thread cutting: approx. 10% (1 l concentration in 10 l water).

Content: 5 liter (€12.42 / 1 liter)

€62.10

In Stock

In Stock

Flasche, Lotion
Drilling oil concentrate 1L chlorine-free (F) E-COLL
Application concentration: Milling: approx. 9% (1 l concentration in 11 l water) Sawing, turning, drilling: approx. 10% (1 l concentration in 10 l water) Threading: approx. 10% (1 l concentration in 10 l water)

€206.19

In Stock

In Stock

Opta cut 3000 10l Gebinde
Opta cut 3000 10l Gebinde
opta Cut 3000 Premium-Schneidöl - Premium-Schneidöl auf Mineralölbasis - Für die Bearbeitung von hochlegierten Stählen, Edelstahl, Stahl, Guss, Buntmetallen und Aluminium - Hervorragende Leistungen bei allen schwierigen spanabhebenden Bearbeitungen - Chlor-, silikon-, PCB- und lösemittelfrei Technische Daten Inhalt: 10 l Gewicht: 9 kg Art.-Nummer: DVE4030968557984 Shop-Nummer: DVE4030968557984 EAN: 4030968557984

Content: 10 liter (€17.79 / 1 liter)

€177.89

In Stock

In Stock

10x OKS Schneidöl für a. Metalle 390 250 ml
10x OKS Schneidöl für a. Metalle 390 250 ml
OKS 390 Schneidöl für alle Metalle - Für Zerspanungsarbeiten an allen Metallen - Erlaubt hohe Schnittgeschwindigkeiten - Vermindert Kraftaufwand - Ergibt optimale Schnittflächen und verlängert Werkzeugstandzeiten - Universell einsetzbar in Werkstätten und bei Montagen - Dichte (20 °C), 0,86 g/ml - VKA-Test (Schweißkraft) 3400 N Technische Daten: Inhalt: 250 ml Gewicht: 240 g Art.-Nummer: DVE4038127301171 Shop-Nummer: DVE4038127301171

Content: 2.5 liter (€67.54 / 1 liter)

€168.84

In Stock

In Stock

Opta Spezial-Schneidöl CUT DVGW S 10L
Opta Spezial-Schneidöl CUT DVGW S 10L
opta Cut S DVGW Spezial-Schneidöl - Spezialschneidöl mit DVGW-Zulassung - Synthetisch, chlorfrei - Gebrauchsfertig, nur unverdünnt einsetzen - Für die Bearbeitung von Stahl und Edelstahl - Speziell zum Gewindeschneiden und Sägen an Trinkwasserversorgungs- und Sanitäranlagen - Verarbeitung in Rohrgewindemaschinen Technische Daten: Inhalt: 10 l Ausführung: Kanister Gewicht: 11 kg Art.-Nummer: DVE4030968000121 Shop-Nummer: DVE4030968000121

Content: 10 liter (€17.66 / 1 liter)

€176.60

In Stock

In Stock

High performance cutting oil CUT 2000 5L
High performance cutting oil CUT 2000 5L
High-performance cutting oil opta Cut 2000 - High-performance cutting oil based on mineral oil - Can be used for circulation and spray cooling as well as for manual processing - For machining steel, stainless steel, aluminum and non-ferrous metals.

€74.21

In Stock

In Stock

Cutting oil spray CUT 400 ml
Cutting oil spray CUT 400 ml
Cutting oil spray opta Cut - Cutting oil spray based on mineral oil - Fast, clean dosing and application - For machining steel, stainless steel, cast iron and aluminum.

Content: 4.8 liter (€577.10 / 12 liter)

€230.84

In Stock

In Stock

Cut Akafill 210 ml
Cut Akafill 210 ml
Cutting oil opta Cut Akafil - Mineral oil based cutting oil - For machining steels and stainless steel - Excellent performance especially for threading, thread forming and reaming in manual processing - opta Cut Akafil is chlorine, silicone, PCB and solvent free.

Content: 2.1 liter (€57.13 / 1 liter)

€119.98

In Stock

In Stock

Universal oil 100 ml
Universal oil 100 ml
HANSELINE fine oil - HANSELINE fine oil is a hydrocarbon, which is particularly suitable by its purity for the lubrication of high-quality technical precision mechanics - The oil is water bright and oxidizes even under UV and oxygen influence only very slowly - Therefore it possesses excellent aging characteristics - Due to its low viscosity and itsgood Wettungsfähigkeit it preserves the material against corrosion - By its small internal resistance it is suitable also for very fast working mechanics - Resin and acid-free

Content: 0.1 liter (€132.80 / 1 liter)

€13.28

In Stock

In Stock

Subscribe to the newsletter and receive a voucher

Stay up to date at all times: Receive exclusive offers, new products, and practical solutions for industry, trade, and emergency services. As a thank you for signing up, you will receive a €5 voucher, redeemable on orders of €70 or more and valid for 14 days.


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
This website uses cookies to ensure the best experience possible. More information...