Forum Universal gas detector GS-400 JUMTEC

Universal gas detector GS-400

- For leak detection on natural gas lines, LPG lines, water lines, air conditioners, heat pumps and fuel cells
- It is suitable for hydrogen H2, so that with the help of forming gas 95/5 (tracer gas), precise leak detection can be carried out on lines that are not normally filled with gas, such as water
lines, floor heating systems, etc. can be carried out
- TFT color display
- Flexible sensor arms, with new digital sensors, which compared to conventional semiconductor sensors hardly any aging process and hardly any cross-sensitivities (cleaning agents, spirit, alcohol do not lead to erroneous measurements)
- Highly accurate response
sensitivity of 1ppm and a measuring range up to 100% LEL of the respective gas type, eg methane 44000 ppm (4.4 vol.%) each leakage point can be located precisely and this with a very short response time of the sensor
- The same sensor, which is used in the area of natural gas, can also be used in the area of leak detection on water pipes with
the help of a test gas (95 % nitrogen + 5 % hydrogen) by switching the sensor characteristic
- With the sensor for refrigerants almost all common safety refrigerants such as. e.g. R12, R22, R134a, R152a, R404a, R407c, R410a, R507a, R600a etc. can be detected
- Response sensitivity is <3 g/year
- Leaky air conditioning systems must not be
filled with refrigerant according to. Current regulations are no longer filled with refrigerant, not even for leak detection
- When pressing with forming gas instead of nitrogen can now be detected with the GS-400 the leak directly
- Basic device is virtually wartungsfrei and can be used in the meantime with other sensors further, since only
the individual sensors to a possible calibration mssen

Delivery: With 3 x 1.5 V Mignon batteries, operating instructions, in Kunststofftkoffer.